Home > Shop Online > Yamaha Superchargers
Sort By:
Page of 1
Fizzle ZR4 Supercharger Impeller (33+ PSI) Fizzle Z3 Supercharger Impeller (27+ PSI) Fizzle V2 SHO Supercharger Impeller (18+ PSI)
Introducing the king of drop-in supercharger impellers!!! This next generation technology integrates the supercharger nut to allow for maximum blade height and achieve the ultimate acceleration and top speed!

Our patent pending Fizzle ZR4 Supercharger Impeller will boost 30+ PSI @ 9500 RPM and will max out at more than 33 PSI at higher RPM levels.

Weighing in at less than 115 grams, this lightweight, precision machined billet aluminum supercharger is Hydrodrags Spec Class legal and is a game changer for drag racing. There is no machining required to the supercharger housings in order to fit this wheel. It is 100% drop-in to the factory Yamaha SVHO supercharger housing.

Typical gains are 14+ PSI more boost pressure and 900+ more RPMs over the OEM supercharger wheel and massive acceleration gains.

An aftermarket heavy duty supercharger shaft kit must be installed to use this high performance aftermarket supercharger impeller.
 		Experience arm-stretching acceleration, blistering top speeds and instant throttle response with the Fizzle Z3 Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 98 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!

Typical gains are 9 PSI more boost pressure and 600+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!

The Fizzle Z3 Supercharger Impeller will boost 27+ PSI @ 9500 RPM and will max out at more than 28 PSI at higher RPM levels.

We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
Increase top speed, acceleration and throttle response with the Fizzle V2 SHO Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 101 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch! This is a drop-in wheel, meaning this impeller fits directly into the factory Yamaha SHO supercharger housing without any modification or machining.

Typical gains are 10+ PSI more boost pressure over the stock SHO supercharger impeller!

The Fizzle V2 SHO Supercharger Impeller will boost 17-19 PSI at 8800 RPM.

This supercharger impeller is designed to give you that extra edge over a factory equipped ski.

We recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
Fizzle Z2 Supercharger Impeller (21+ PSI) RIVA Yamaha Supercharger Shaft Uprgrade Kit Fizzle V1 SHO Supercharger Impeller (14+ PSI)
Increase top speed, acceleration and throttle response with the Fizzle Z2 Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 97 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!

Typical gains are 6 PSI more boost pressure and 400+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!

The Fizzle Z2 Supercharger Impeller will boost 24+ PSI @ 9300 RPM and will max out at more than 26 PSI at higher RPM levels.

We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
 		The RIVA Super-Duty GEN-4 SHO/SVHO Supercharger Shaft Kit provides the ultimate in reliability for high boost applications. Kit features a revolutionary hydraulic shaft stabilization bearing that limits shaft deflection and wear. Bearing stabilizes end of supercharger shaft via high pressure oil film dramatically increasing the stability of the system. Hydraulic end bearing and one-piece shaft bearing are fed by a through-shaft oiling system providing superior lubrication. Oil is delivered by braided stainless line and injected into a billet end cap that houses hydraulic bearing. Shaft is precision machined from a single piece of high-strength billet steel producing shaft, collar & gear as one piece. This eliminates the common failure point on stock shafts where OEM gear is pressed onto shaft. Shaft also features larger diameter threads & nut for added strength. Kit includes new one piece bearing with increased surface area providing improved torsional stability of shaft. Bearing features superior materials & finish treatment for reduced friction & abrasion resistance. This Shaft & Bearing Kit is a direct replacement for OEM parts and requires no additional modifications for use.
Increase top speed, acceleration and throttle response with the Fizzle V1 SHO Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 100 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch! This is a drop-in wheel, meaning this impeller fits directly into the factory Yamaha SHO supercharger housing without any modification or machining.

Typical gains are 6+ PSI more boost pressure over the stock SHO supercharger impeller!

The Fizzle V1 SHO Supercharger Impeller will boost 13-15 PSI at 8500 RPM.

This supercharger impeller is designed to give you that extra edge over a factory equipped ski.

We recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
Fizzle Z1 Supercharger Impeller (17+ PSI)
Increase top speed, acceleration and throttle response with the Fizzle Z1 Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 96 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!

Typical gains are 3 PSI more boost pressure and 200-300+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!

The Fizzle Z1 Supercharger Impeller will boost 21+ PSI @ 9100 RPM and will max out at more than 23 PSI at higher RPM levels.

This supercharger impeller is designed to give you that extra edge over a factory equipped ski.

We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.