|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Plug and Play ECU system for all Sea-Doo 325 models. Includes either FT550LITE ECU without a display or the FT550 with a built-in display (+ $400), Plug and Play Wire Harness, NanoPro Wideband Monitor with Wiring, Igniter Module.
Fits the following Sea-Doo models:
2024 RXP 325 2024 RXT 325 2025 RXP 325 2025 RXT 325
|
Introducing the DDR billet aluminum intake manifold for Sea-Doo 300 watercraft! This CNC machined long runner manifold is designed for a massive increase in acceleration and top speed gains on highly modified supercharged or turbo Sea-Doo. In our personal testing this manifold gained 3 MPH and shaved more than a half second off of our 0-85 MPH times!
- Billet CNC machined Intake Manifold for turbo and high RPM supercharged Sea-Doo (9,000+ RPM)
- Two 1/8 NPT ports for ultimate convenience
- Original OEM oil dipstick location
- Flow tested and race tested
- 100-300 gains in RPM
This is a made to order item. It will take several weeks to produce.
|
Why buy? - Go Faster (~6 MPH Speed Gain)
- Accelerate Harder
- Lightweight & Efficient
- Fast Guys Choose Fizzle!
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle Z142 Supercharger! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch!
The Fizzle Z142 Supercharger will max out at more than 24 PSI.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger comes fully machined and assembled, including the required supercharger housing spacer. The clutch slip tension is pre-set to the recommended setting. All components are brand new, using the OEM genuine Sea-Doo BRP supercharger as a base to build this performance supercharger.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Why buy? - Go Faster (~5 MPH Speed Gain)
- Accelerate Harder
- Lightweight & Efficient
- Fast Guys Choose Fizzle!
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle Z142-S Supercharger! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch!
The Fizzle Z142-S Supercharger will max out at more than 23 PSI.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger comes fully machined and assembled, including the required supercharger housing spacer. The clutch slip tension is pre-set to the recommended setting. All components are brand new, using the OEM genuine Sea-Doo BRP supercharger as a base to build this performance supercharger.
|
Why buy? Go Faster (~3 MPH Speed Gain) Accelerate Harder Lightweight & Efficient Fast Guys Choose Fizzle! With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle X4 Supercharger! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch!
Typical gains are ~3 PSI more boost pressure and ~300 more RPMs over the OEM supercharger wheel!
The Fizzle X4 Supercharger will max out at more than 16 PSI.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger comes fully assembled, including the required supercharger housing spacer. The clutch slip tension is pre-set to the recommended setting. All components are brand new, using the OEM genuine Sea-Doo BRP supercharger as a base to build this performance supercharger.
|
Why buy? - Go Faster (~3 MPH Speed Gain)
- Accelerate Harder
- Lightweight & Efficient
- Fast Guys Choose Fizzle!
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle Z135 Supercharger! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch!
The Fizzle Z135 Supercharger will max out at more than 19 PSI.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger comes fully machined and assembled, including the required supercharger housing spacer. The clutch slip tension is pre-set to the recommended setting. All components are brand new, using the OEM genuine Sea-Doo BRP supercharger as a base to build this performance supercharger.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete Sea-Doo 300 Supercharger Assembly - part number 420893588 (also replaces 420893567 and 420893566) and fits all 2016-2025 Sea-Doo 300 models. Bolt-in and go! This is a genuine Sea-Doo factory replacement part, supplied directly from BRP Sea-Doo. If you need a performance supercharger, check out the Fizzle Z135, Z142-S, Z142 supercharger assemblies.
Fits the following Sea-Doo models:
2016 RXT-X 300 2016 RXP-X 300 2016 GTX Limited 300 2017 RXT-X 300 2017 RXP-X 300 2017 GTX Limited 300 2018 RXT-X 300 2018 RXP-X 300 2018 GTX Limited 300 2019 RXT-X 300 2019 RXP-X 300 2019 GTX Limited 300 2020 RXT-X 300 2020 RXP-X 300 2020 GTX Limited 300 2021 RXT-X 300 2021 RXP-X 300 2021 GTX 300 2021 GTX Limited 300 2022 RXT-X 300 2022 RXP-X 300 2022 GTX 300 2022 GTX Limited 300 2023 GTX 300 2023 GTX Limited 300 2023 RXP-X 300 2023 RXP-X Apex 300 2023 RXT X-300 2024 GTX 300 2024 GTX Limited 300 2024 GTR-X 300 2025 GTX 300 2025 GTR-X 300
|
Complete Sea-Doo 230/255/260 Supercharger Assembly - part number 420893551 (also replaces 420893555, 420893563, 420881992 and 420881990) and fits all 2008-2024 Sea-Doo 230/255/260 models. Bolt-in and go! This is a genuine Sea-Doo factory replacement part, supplied directly from BRP Sea-Doo. If you need a performance supercharger, check out the Fizzle X4 supercharger assembly.
|
Why buy? - High efficiency cooling element
- Durable construction
- Lower Intake Temperatures
- Eliminate intercooler heat fade
- Fast Guys Choose Fizzle!
Kit contents: Fizzle SuperCooler, Fizzle Sea-Doo 325 Intercooler Tubing Upgrade Kit, genuine TIAL Blow Off Valve, intercooler waterline fittings, hoses, zinc anode, complete set of heavy duty 5-layer, 4-ply silicone tubing with internal metal reinforcement and high quality Stainless Steel hose clamps.
Direct replacement for full OEM Sea-Doo 325 HP intercooler system
Maximize throttle response and achieve lower Air Intake Temperatures (AIT)
Utilizes stock intercooler location, works with stock exhaust system or aftermarket exhaust
Designed for maximum horsepower capacity
Fits all 2024-2025 RXP-X 325, RXT-X 325 and GTX 325 Sea-Doo models
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
- Achieve lower Intake Air Temperatures (IAT), increase throttle response and drastically reduce intercooler heat fade.
- Replace the stock rubber intercooler hoses that are prone to becoming soft and weak, leading to premature failure.
- Add a blow off valve to reduce back pressure on the supercharger wheel.
CLICK TO LEARN MORE
|
Why buy?
- High efficiency cooling element
- Durable construction
- Lower Intake Temperatures
- Eliminate intercooler heat fade
- Fast Guys Choose Fizzle!
Kit contents: Fizzle SuperCooler, Fizzle Sea-Doo 325 Intercooler Tubing Upgrade Kit, genuine Turbosmart Blow Off Valve, intercooler waterline fittings, hoses, zinc anode, complete set of heavy duty 5-layer, 4-ply silicone tubing with internal metal reinforcement and high quality Stainless Steel hose clamps.
Direct replacement for full OEM Sea-Doo 325 HP intercooler system
Maximize throttle response and achieve lower Air Intake Temperatures (AIT)
Utilizes stock intercooler location, works with stock exhaust system or aftermarket exhaust
Designed for maximum horsepower capacity
Fits all 2024-2025 RXP-X 325, RXT-X 325 and GTX 325 Sea-Doo models
|
Why buy? - High efficiency cooling element
- Durable construction
- Lower Intake Temperatures
- Eliminate intercooler heat fade
- Fast Guys Choose Fizzle!
Kit contents: Fizzle SuperCooler, Fizzle Sea-Doo 325 Intercooler Tubing Upgrade Kit, non-brand name 50mm Blow Off Valve, intercooler waterline fittings, hoses, zinc anode, complete set of heavy duty 5-layer, 4-ply silicone tubing with internal metal reinforcement and high quality Stainless Steel hose clamps.
Direct replacement for full OEM Sea-Doo 325 HP intercooler system
Maximize throttle response and achieve lower Air Intake Temperatures (AIT)
Utilizes stock intercooler location, works with stock exhaust system or aftermarket exhaust
Designed for maximum horsepower capacity
Fits all 2024-2025 RXP-X 325, RXT-X 325 and GTX 325 Sea-Doo models
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Introducing the ultimate performance camshaft for Sea-Doo engines! Gain 350-450 RPM, 3-5 MPH, and arm stretching acceleration throughout the entire power band with the Calas Performance Billet Camshaft. This cam is precision CNC machined from high strength steel and heat treated for maximum durability and consistent results every time. Champion tested and champion proven! This camshaft is the same one used by multi-time HydroDrag World Champion Ernesto Calas in his personal racing PWC!
Fits all supercharged Sea-Doo PWC 2003-2025 185 HP, 215 HP, 230 HP, 255 HP, 260 HP, 300 HP, 325 HP models.
Requires upgraded valve springs and titanium retainers.
|
Applications: All Years Sea-Doo 300 and 2018+ 230 HP watercraft
- Achieve lower Intake Air Temperatures (IAT), increase throttle response and drastically reduce intercooler heat fade.
- Replace the stock rubber intercooler hoses that are prone to becoming soft and weak, leading to premature failure.
CLICK TO LEARN MORE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: 2003-2009 215 & 185HP Sea-Doo RXP/RXT/GTX
- Gain approx. 3 MPH Top Speed and 300 RPMs
- Drastically reduce Intake Air Temps (IAT)
- Eliminate Intercooler Heat Soak
CLICK TO LEARN MORE
|
- State-of-the-art sponsons made from carbon fiber for performance.
- CNC billet bracket for exceptional sturdiness and stability.
- Sponson height adjustable through 5-point billet mounting points.
- Hassle-free bolt-on installation using original OEM mounting points.
|
Why buy? - Go Faster (~6 MPH Speed Gain)
- Accelerate Harder
- Lightweight & Efficient
- Fast Guys Choose Fizzle!
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle Z142 Supercharger Impeller! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch! It will max out at more than 24 PSI of boost.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger impeller comes with the required supercharger housing spacer. The front and rear housing must be machined to fit this impeller.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unlock the performance of your Sea-Doo by turning its potential into a reality! This tuning license is tied to your VIN and gives you unlimited access to the Riva Tuning library for your Sea-Doo. Easily switch between performance tunes and then back to stock settings if you wish. There are a number of tune files for many different levels of performance modifications.
The MaptunerX handheld tuning device used to load the tune into your ECU is sold separately. Bundle the MaptunerX with your tuning license for only $300 or rent our MaptunerX with a refundable $300 deposit. The MaptunerX tuning device can program more than 1 watercraft as long as a separate tuning license has been purchased for each additional watercraft.
System Requirements:
Windows based PC with Windows 7 or higher and a working internet connection.
|
Applications: All years Sea-Doo 300 & 2018+ 230 HP watercraft
- Designed for maximum horsepower capacity! Achieve lower Intake Air Temperatures (IAT), increase throttle response and drastically reduce intercooler heat fade.
- Tested on stock and modified supercharged skis and turbocharged race skis with 50+ PSI of boost.
CLICK TO LEARN MORE
|
Applications: 2012-2015 Sea-Doo 260 HP (non-suspension)
Retrofits to GTR 215, GTX 215 (S3 hull) using OEM 260 Mount
- Gain 80-120+ peak RPMs over OEM Sea Doo 260 HP intercoolers
- Eliminate intercooler heat fade
- Fits stock intercooler location, works with stock exhaust system or aftermarket exhaust
CLICK TO LEARN MORE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This full rebuild kit for 300 HP Sea-Doo Superchargers comes with everything pictured. All of the components are genuine Sea-Doo parts directly from BRP/Rotax.
|
Why buy? - Go Faster (~5 MPH Speed Gain)
- Accelerate Harder
- Lightweight & Efficient
- Fast Guys Choose Fizzle!
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle Z142-S Supercharger Impeller! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch! It will max out at more than 23 PSI of boost. This impeller fits the factory OEM Sea-Doo front housing. The rear housing must be machined to 143mm to fit this impeller.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger impeller comes with the required supercharger housing spacer.
|
Applications: Upgrade Fizzle First Generation or similar
- Upgrade your Fizzle First Generation Sea-Doo Intercooler or most generic DIY intercoolers
- Typical gains of 100-160+ RPMs
- Eliminate intercooler heat fade.
CLICK TO LEARN MORE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Why buy? - Go Faster (~3 MPH Speed Gain)
- Accelerate Harder
- Lightweight & Efficient
- Fast Guys Choose Fizzle!
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle X4 Supercharger Impeller! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch!
Typical gains are ~3 PSI more boost pressure and ~300 more RPMs over the OEM supercharger wheel!
The Fizzle X4 Supercharger Impeller will max out at more than 16 PSI.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger comes with the required supercharger housing spacer.
|
Why buy? - Go Faster (~3 MPH Speed Gain)
- Accelerate Harder
- Lightweight & Efficient
- Fast Guys Choose Fizzle!
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
Increase top speed, acceleration and throttle response with the Fizzle Z135 Supercharger Impeller! More torque and more horsepower = more fun!!
This lightweight, precision machined billet aluminum supercharger packs a big punch!
Typical gains are 3+ PSI more boost pressure and 300+ more RPMs over the OEM supercharger wheel!
The Fizzle Z135 Supercharger Impeller will max out at more than 19 PSI.
Get more Speed, more Acceleration, and more Thrill!
Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains!
This supercharger comes with the required supercharger housing spacer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
- Add a blow off valve to reduce back pressure on the supercharger wheel.
- Replace the stock rubber intercooler hoses that are prone to becoming soft and weak, leading to premature failure.
- Heavy duty 5-ply silicone construction with internal metal reinforcement. Includes high quality marine grade SS316 hose clamps.
CLICK TO LEARN MORE
|
Applications: ALL 2008-2015 Sea-Doo 260 and 255 HP Models
- Typical gains of 80-120+ peak RPMs over OEM Sea Doo 255 and 260 HP intercoolers
- Eliminate intercooler heat fade
- Utilizes stock intercooler location, works with stock exhaust system or aftermarket exhaust
CLICK TO LEARN MORE
|
Applications: 2003-2009 215 & 185HP Sea-Doo RXP/RXT/GTX
- Gain 2+ MPH Top Speed and 200+ RPMs
- Drastically reduce Intake Air Temps (IAT)
- Reduce Intercooler Heat Soak
CLICK TO LEARN MORE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High performance 1100cc fuel injector kit supplies modified Sea-Doo engines with the necessary amount of fuel to produce reliable horsepower. Must be used with reflashed or aftermarket racing ECU for correct Calibration.
|
|
Calas Performance Sea-Doo retainers are manufactured with high quality military certified Titanium alloy and are CNC machined for a tight fit. Calas Performance dual valve springs are computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue. We also utilize computer software control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Solas 161mm 3-blade Concord Impeller increases low-end thrust and top-end speed on Sea-Doo 300 HP PWCs. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.
For use in craft equipped with a 161mm diameter wear ring.
Fits the following Sea-Doo models:
2025 RXP-X 325
2025 RXT-X 325 2025 GTX Limited 325 2025 GTR-X 300 2025 GTX 300 2024 RXP-X 325 2024 RXT-X 325 2024 GTR-X 300 2024 GTX 300 2024 GTX Limited 300 2023 GTX 300 2023 GTX Limited 300 2023 RXP-X 300 2023 RXT-X 300 2022 GTX 300 2022 GTX Limited 300 2022 RXP-X 300 2022 RXT-X 300 2021 GTX 300 2021 GTX Limited 300 2021 RXP-X 300 2021 RXT-X 300 2020 GTX Limited 300 2020 RXP-X 300 2020 RXT-X 300 2019 GTX Limited 300 2019 RXP-X 300 2019 RXT-X 300 2018 GTX Limited 300 2018 RXP-X 300 2018 RXT-X 300 2017 GTX Limited 300 2017 RXP-X 300 2017 RXT-X 300 2016 GTX Limited 300 2016 RXP-X 300 2016 RXT-X 300
|
|
Use this TiAL 50mm blow off valve to relieve excess pressure during off-throttle situations to reduce supercharger clutch and gear wear. Reduce heat soak by releasing unused air in the charge tube. The body and all internal components are CNC-machined from 6061 aluminum alloy. Securely mounts with a V-Band clamp design. Valve seal utilizes a Viton O-ring that is clamped in place for maximum durability. Valve stem and guide are Teflon-lubricated and hard anodize-coated for wear resistance. Blow-off Valve also comes with a machined aluminum banjo-type air fitting and bolt with oversized 10mm hose barb for quick actuator response. INCLUDES 8 PSI SPRING. Included with TiAL Blow-Off Valve: - 50mm Valve Assembly with 8psi Spring
- V-band Clamp
- TiAL Air Fitting
- High Pressure Viton O-ring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
- Add a blow off valve to reduce back pressure on the supercharger wheel.
- Replace the stock rubber intercooler hoses that are prone to becoming soft and weak, leading to premature failure.
- Heavy duty 5-ply silicone construction with internal metal reinforcement. Includes high quality marine grade SS316 hose clamps.
CLICK TO LEARN MORE
|
Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
- Add your 50mm TiAL/Turbosmart Style or 35mm HKS Style blow off valve to reduce back pressure on the supercharger wheel.
- Replace the stock rubber intercooler hoses that are prone to becoming soft and weak, leading to premature failure.
- Heavy duty 5-ply silicone construction with internal metal reinforcement. Includes high quality marine grade SS316 hose clamps.
CLICK TO LEARN MORE
|
The Calas Performance Sea-Doo Titanium Retainer set includes twelve retainers that are precision machined with high quality military certified Titanium alloy. These retainers are extremely strong, lightweight and add improved wear resistance. The retainers are made to fit OEM factory valve spring set for all Sea-Doo 325 models.
Fits the following models:
2024 RXP-X 325
2024 RXT-X 325
2025 RXP-X 325
2025 RXT-X 325
2025 GTX Limited 325
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Calas Performance Sea-Doo Titanium Retainer set includes twelve retainers that are precision machined with high quality military certified Titanium alloy. These retainers are extremely strong, lightweight and add improved wear resistance. The retainers are made to fit OEM factory valve spring set for all Sea-Doo 4-stroke models 2002-2025 except for the 2024-2025 Sea-Doo 325 HP models.
Not Compatible with Sea-Doo 325
|
Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
- Replace the stock rubber intercooler hoses that are prone to becoming soft and weak, leading to premature failure.
- Heavy duty 5-ply silicone construction with internal metal reinforcement. Includes high quality marine grade SS316 hose clamps.
CLICK TO LEARN MORE
|
This Intake manifold brace girdle provides heavy duty reinforcement to the intake manifold by giving it added strength that allows it to hold up to higher boost pressures and prevent the intake manifold from splitting at the seam. This part does not require any drilling or cutting of the intake manifold. This brace fits all Sea-Doo 325 watercraft and we consider it a must-have item.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RIVA overhead Valve Compression Tool allows easy removal of valve springs and keepers without removing cylinder head. Includes compression adapter to pressurize cylinder keeping valves in place during removal of stock springs and keepers. For use with all Sea-Doo 4-TEC 1503 and 1630 ACE engines.
|
This Intake manifold brace girdle provides heavy duty reinforcement to the intake manifold by giving it added strength that allows it to hold up to higher boost pressures and prevent the intake manifold from splitting at the seam. This part does not require any drilling or cutting of the intake manifold. This brace fits all supercharged Sea-Doo watercraft and we consider it a must-have item for any Sea-Doo 300/260/255/230/215 and a great precautionary measure for any modified Sea-Doo pushing more than 13 PSI of boost.
|
The JP Racing oil catch can eliminates power-robbing blow by fumes and oil vapor from your engine's air intake tract. Also improves intercooler efficiency by preventing an oil sludge coating that saturates the inside of the intercooler. Excess oil vapor is routed to our stainless steel catch can where it collects for draining via petcock valve. The JP Racing catch cans are hand made in the USA!
*Make sure your oil level isn't overfilled. This will cause Excess crank case pressure, this will fill the oil catch can and may spill oil over into the hull. Keep oil level just under the top bend of your oil stick.
Check and drain during your service interval. We recommend 25 hours.
Fits all Sea-Doo 325 & 300 watercraft
Kit includes: - Black Breather Filter
- Stainless Steel Catch Can
- 3/4 Hose
- Brass Petcock drain
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Let your engine breathe better! This kit allows you to easily remove the restrictive filter element from inside the intake manifold. Removing the restriction increases horsepower and allows for gains of ~1 PSI of boost pressure. Included is a cutting guide for the required 3-1/8” (79mm) hole saw that’s needed to remove the filter element (hole saw sold separately). The void left by the filter element is filled with the provided precision machined billet aluminum block-off plug with o-ring seals and also includes a 2-piece billet aluminum clamp to secure the block-off plug in place. The block-off plug also features a 1/8” NPT threaded port that allows you to connect a vacuum line to work with a wide array of accessories such as blow off valves, boost gauges, or rising rate fuel pressure regulators. All the aluminum components are anodized for increased corrosion protection.
Fits all Sea-Doo 325, 300, and 230 HP watercraft
|
This hose replaces your OEM or aftermarket hose going from the intercooler to throttle body when changing from the factory intake manifold to the DDR Billet Intake Manifold on Sea-Doo 300 models. The new intercooler hose is required because the throttle body alignment changes after installing the DDR manifold.
|
Increase speed and achieve a drier ride by raising the bow of your watercraft with this 2 degree pump wedge. The extra angle creates more lift in the hull and less drag, which typically increases top speed by around 1-2 MPH. This pump wedge is machined from billet aluminum and is anodized for increased corrosion protection. It has easy installation as the wedge fits directly between where the venturi nozzle bolts to the jet pump housing.
Fits all Sea-Doo watercraft equipped with a 159mm jet pump
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: All Sea-Doo and Yamaha Intercooled Watercraft
- GIANT in size compared to many of the mainstream filters used by the jetski aftermarket.
- Stainless steel mesh filtering screen helps maintain water flow
- Helps prevent premature intercooler failure by keeping damaging debris out of the intercooler
CLICK TO LEARN MORE
|
This is a replacement ceramic ball bearing for 300 HP Sea-Doo Superchargers. Each supercharger uses 2 bearings total. These components are genuine parts for Sea-Doo directly from BRP/Rotax. Sea-Doo superchargers operate in a high RPM environment that puts stress on the bearings over time. We recommend replacing the bearings on a regular service interval of a minimum of every 2 years or 100 hours, whichever comes first, to promote longevity and reduce the risk of bearing failure.
|
This supercharger shaft holding tool for Sea-Doo 300 HP watercraft allows you to lock the supercharger shaft in place in order to service the supercharger, change out the supercharger impeller wheel and check/set the clutch slip tension.
Fits all Sea-Doo 300 watercraft from 2016 to present
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This blow off valve block-off kit includes an aluminum block-off plate, o-ring, and v-band clamp. It’s used to cover and seal off the 50mm blow off valve flange in the event that you decide to not use a blow off valve on your setup. This block-off kit is compatible with the 50mm flange that is included with certain Fizzle products, such as the Fizzle Yamaha Intercooler Kits and select Fizzle blow off valve kits for Sea-Doo and Yamaha.
|
This is a set of 5 heavy duty spring washers for 2004-2025 215, 230, 255 & 260 HP Sea-Doo PWC & Jet Boat models. The washers are designed to achieve a higher supercharger slip tension than is possible with the OEM spring washer set, which is required when running an upgraded high boost supercharger wheel.
|
This is a set of two supercharger shims (0.2mm thick) to fit 2004-2025 215, 230, 255 & 260 HP Sea-Doo PWC & Jet Boat models. The shims are used to achieve a higher slip tension when fine tuning your supercharger clutch setting.
|
|
|
